Well, at the beginning of this week I decided to throw in the towel with the oval build and admit defeat. Whilst it would still have been possible to get the car running and to the lake, I would have

Haven't had a chance to post much lately, been pretty busy either working or getting the oval back together. Progress has been marred a little by real work, which has taken me out of Adelaide, this ha

OK, fresh back from the scrutineering meeting yesterday, decided to get cracking. Went out and sourced some steel for the scatter-shield, and the RHS braces that were discussed, and also some sheet

First off, if you haven't noticed, we finally released the first issue of Vdubber magazine, thanks for all of your kind words, and support, it looks like it's a success. A big thanks to all of the con

Feel a bit lost without the car to work on, so have been a bit slack. Have spent the time doing a spot of research on ye olde interwobble, trying to track down some cheap gauges. Found some flea bay s

Delivered the oval to Donegal Engineering today to have the cage made up, big thanks to Paul Penny and his brother for helping out, was good to hook up. Sorry I couldn't have stayed a bit longer, bu

Made more good progress today, i fitted the new pan halves and got the body back on the pan. Somehow I managed to do this by myself - I guess it's a lot easier if you're not worried about scratch

Progress was good today, managed to get the IRS finished, all that is required is the final welding and a little patching where I've relocated teh handbrake cable to the lower half of the pan. I will

Fitted the 915 box in today, it sits pretty good. Had to cut out old front gearbox mount to get enough clearance. Still got to make up mountings but will fab some custom ones to fit. I've also cut t

The past few weeks haven't seen much progress with the oval, most of this time has been spent waiting for parts, but a little more about that later. We have also been pretty busy trying to get the ezi