• Managed to get an hour or so on the bus today. Started to make up the hard lines for the oil system. Need to get these done before I can get the gearbox installed as they will be a pig to got done afterwards. I made up a bracket to terminate the hard lines into and provide a solid mounting point for the bulkhead fittings. From this bracket there will be flexi-lines running across to another bracket mounted to the chassis. The bracket will be welded onto the rear bar. Need to pick up a bender as mine only goes up to 1/2".
    0
    0
    0
    0
    0
    0
    Comments (0)
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
Unable to load tooltip content.
Monthly Leaders
Featured Build-Page
Latest Blog Posts